
< UB375Z Operation Specification > Ver. 1.09
For Internal Use Only 26
When “Disp. Unit ID” menu is On, if the scanner receives a Unit ID, the scanner displays
“UID:xxx”. XXX means I-CALL ID.
6.6.13. Key Operation During Scan Mode
Refer to APPENDIX “Key Action List”. (UB375Z_KeyActionList_V0_15.pdf)
6.7. SCAN HOLD MODE
Press [CHANNEL] key in Scan Mode to go to Scan Hold Mode.
6.7.1. Display while Scan Hold Mode
The LCD display in Scan Hold mode is as follows.
Figure 6-20 Scan Hold
C162.2 : This appears when the channel has a CTCSS or DCS. In CTCSS/DCS Search
Mode or in All mode of Audio Type, if this is hit, the value blinks. If CTCSS/DCS is
set to lockout, the display alternates between the CTCSS/DCS data and "******". In
P25 NAC Search Mode, if a P25 NAC code is found, it will also be displayed in this
area.
HOLD : This icon appears while in Scan Hold Mode.
FM : These icons show the modulation type.
ATT : This icon appears when the channel is set to “Attenuator On”.
Fx: : This icon appears with icons of Quick Key number for Favorites List (from “0” to
“99”). x shows current ten’s place of Quick Key for Favorites List.
Sx: : This icon appears with icons of Quick Key number for Systems (from “0” to “99”).
x shows current ten’s place of Quick Key for System.
6.7.2. General Operation
Turn [Rotary / FUNC] knob to select the channel, trunk frequency, TGID or search frequency.
Hold on a Channel in Conventional System:
The scanner displays System, Department name and Channel name. The Quick Key for
Favorites List assigned the Favorites List and the Quick Key for system assigned the System
that the channel belongs to is displayed. And the scanner monitors selected channel
continuously.
Press [Rotary / FUNC] knob to go to Function Mode and display the Favorites List Number Tag,
System Number Tag, Channel Number Tag.
channel name
frequency
Commenti su questo manuale